HP Turbine Rotors ( Qty 2) and Inner Shell (Qty 1) (SOLD)
Auction ID
2261
Status
Closed
Type
Standard (PQT)
Started
11/12/2012 11:52 AM EST
Ended
11/28/2012 1:00 PM EST
Quantity
0
Minimum Bid Increment
$100.00
Manufacturer
Westinghouse
Division
AEP - Ohio
Equipment Location
CONESVILLE GENERATING STATION
- CONESVILLE
, OH
Details
Model Number
Building Block 22 (BB22)
Asset ID
12H-394
Manufacturer
Westinghouse
UOM
Lot
Condition Code
Used
AEP SURPLUS EQUIPMENT
HP Turbine Rotors ( Qty 2) and Inner Shell (Qty 1)
Manufacturer: Westinghouse
Model: Building Block 22 (BB22)
Quantity: 1 lot (Includes 2 rotors and 1 inner shell)
Location: This item is located in Charleston, WV and Conesville, OH
Condition: Used
Description:
There are two rotors included:
~ 1st is in a wrecked condition at the Central Machine Shop in Charleston, WV and is available immediately. The first row of blades has been removed and scrapped. There is damage to several other rows. This rotor is not in a usable condition. Rotor weight is estimated at 33200 lbs.
~ 2nd is currently being removed from service and is in Conesville, OH. This rotor is in usable condition and went into its current service run in 2004. It is expected to be in good condition, but will require inspection/overhaul for possible continued use. Rotor weight is estimated at 33200 lbs.
The material compositions are below and were obtained using a material analyzer. They may not completely reflect the type of material expected.
Stationary Components: (Located in Conesville, OH)
The material of the stationary components listed above is mostly 2.25 Chrome material. The Blade Ring #2 may be 1.25 Chrome; this would not be known without using a material analyzer. The stationary components are all expected to be in a worn, but good condition following the 8 year run, 2004 to 2012. These components have also had an extensive history of weld repairs. We will not be removing any blades to sell separately. All the blades will remain intact to the 2 rotors and the blade carriers. The stationary blades have high content chrome similar to the rotating blades. The amount cannot be specifically identified without using a material analyzer. The components are really only usable “as is”. It is not feasible to remove blades and reuse them elsewhere.
Known Concerns: See Description for concerns. (Listed concerns are what have been observed by the business unit selling the item and have not been validated by a technician. Areas not listed as known concerns or None do not imply any warranty as to life or condition and only imply that a concern was not noticed by the previous user. This item is being sold AS IS WHERE IS in its existing condition.)
Conditions for sale of AEP Surplus Equipment / Material:
~ All Items are sold AS IS WHERE IS. No warranty given or implied.
~ Inspections are on the potential buyers time and expense and must be scheduled in advance.
~ Test operation of the item will not be permitted.
~ Buyer will be required to sign a Bill of Sale and pay any applicable taxes.
~ After payment clears, the buyer can arrange for pick up.
HP Turbine Rotors ( Qty 2) and Inner Shell (Qty 1)
Manufacturer: Westinghouse
Model: Building Block 22 (BB22)
Quantity: 1 lot (Includes 2 rotors and 1 inner shell)
Location: This item is located in Charleston, WV and Conesville, OH
Condition: Used
Description:
There are two rotors included:
~ 1st is in a wrecked condition at the Central Machine Shop in Charleston, WV and is available immediately. The first row of blades has been removed and scrapped. There is damage to several other rows. This rotor is not in a usable condition. Rotor weight is estimated at 33200 lbs.
~ 2nd is currently being removed from service and is in Conesville, OH. This rotor is in usable condition and went into its current service run in 2004. It is expected to be in good condition, but will require inspection/overhaul for possible continued use. Rotor weight is estimated at 33200 lbs.
The material compositions are below and were obtained using a material analyzer. They may not completely reflect the type of material expected.
| Fe | Mn | Cr | Mo | Cu | |
| Rotor Body 2.25 Cr material? P-22 material? | 95.12 | 0.727 | 1.33 | 1.14 | |
| Rotor Blades 430/440? 410/416? | 82.95 | 10.95 | 0.523 | 1.72 |
Stationary Components: (Located in Conesville, OH)
| Inner Cylinder Base | 30,000 lbs |
| Inner Cylinder Cover | 29,000 lbs |
| Inner Cylinder Bolting | 6,100 lbs |
| Nozzle Chambers | 8,700 lbs (2 @ 4350 ea.) |
| Flow Guide | 2,190 lbs |
| Blade Ring #1 | 15,700 lbs (2 @ 7,850 ea.) |
| Blade Ring #2 | 37,400 lbs (2 @ 18,700 ea) |
The material of the stationary components listed above is mostly 2.25 Chrome material. The Blade Ring #2 may be 1.25 Chrome; this would not be known without using a material analyzer. The stationary components are all expected to be in a worn, but good condition following the 8 year run, 2004 to 2012. These components have also had an extensive history of weld repairs. We will not be removing any blades to sell separately. All the blades will remain intact to the 2 rotors and the blade carriers. The stationary blades have high content chrome similar to the rotating blades. The amount cannot be specifically identified without using a material analyzer. The components are really only usable “as is”. It is not feasible to remove blades and reuse them elsewhere.
Known Concerns: See Description for concerns. (Listed concerns are what have been observed by the business unit selling the item and have not been validated by a technician. Areas not listed as known concerns or None do not imply any warranty as to life or condition and only imply that a concern was not noticed by the previous user. This item is being sold AS IS WHERE IS in its existing condition.)
Conditions for sale of AEP Surplus Equipment / Material:
~ All Items are sold AS IS WHERE IS. No warranty given or implied.
~ Inspections are on the potential buyers time and expense and must be scheduled in advance.
~ Test operation of the item will not be permitted.
~ Buyer will be required to sign a Bill of Sale and pay any applicable taxes.
~ After payment clears, the buyer can arrange for pick up.
Product Photos
